Dual/Multi Network Interfaces

Skip this step if Dual Network is not required for your server

Dual Network Interfaces Setup

This process will require a USB Flash Drive

Log in the LiveReach AI app and navigate to the Configuration section of the dashboard.
Select the Servers tab.
Select the Pencil icon on the NVR you wish to configure.
Select the Network Configuration tab.
In the Interface drop down select enp5s0 (Primary Interface).
Toggle on the Internet Access for the correct interface. (use the Primary Interface for Internet).
Click on Add Network
Select enp6s0 (Secondary Interface) and disable internet access
If the network type is DHCP, ensure that is checked, otherwise enter the Static IP configuration.
Press Download and save the file to the Flash Drive
Eject the Flash drive and Plug the Flash Drive into any of the NVR‘s open USB ports.
Wait a couple of seconds before removing the flash drive
The NVR should be configured with the appropriate static or dynamic IPs.

Updated on: 04/04/2024

Was this article helpful?

Thank you!